|
Product overview:
The anti-ultraviolet finishing agent JYK UV-130 is mainly used for anti-ultraviolet processing of silk and wool,which are dyed with acid dyes, cotton, viscose and flax ,which are dyed with reactive dyes. It can also be used for anti-ultraviolet processing of polyester and its blended fabrics.
The treated fabric can absorb ultraviolet rays and improve the color fastness of dyed fabric to the sun.
Product character:
It has little effect on the color and light of fabric;
It can be used for fabrics composed of various natural fibers and synthetic fibers;
Good compatibility, can be used with general textile chemicals (such as resins, adhesives, antistatic agents, softeners, flame retardants, etc.).
Product performance:
Appearance: Light yellow liquid
Ionicity: Weak cation
Density: 1.0-1.1 g/cm3
pH: 8-11
Composition: Benzotriazole light stabilizer
Viscosity: Less than 100 cps
Solubility: Soluble in organic esters and polyols, easily soluble in water
Application methods:
1. Impregnation method:
JYK UV-130 recommended dosage: 2-3% weight ratio to fabric;
Impregnation temperature: 40-50℃; Impregnation time: 30-45min; Drying: 130-150 .
2. Padding method:
JYK UV-130 recommended dosage: 30-50 g/L; padding ratio: 80-100%.
Fabric → dyeing → washing with water (soaping) → drying → soaking in UV-130 → drying ( at 150-180℃).
Precautions:
Pre-test should be carried out before mass production to confirm the compatibility of various additives.
Packing:
25 kg/barrel; Or pack according to customer requirements.
Storage:
Store in a place away from light, dry and well ventilated;
It is forbidden to store in high temperature, open air or places with fire sources.
All the information given above is based on our knowledge and understanding of the product and is for reference only. Before using the product, please do a sample test to confirm whether the results meet your requirements. Because we can't predict or control the end use of the product, every user must operate and use the product safely. The true condition test and performance of the product are the responsibility of the end user, and the company will not bear any quality or patent disputes , nor will it bear any direct or indirect loss liability.
|
